Recipes using conditioner without power consuming

Choosing the appropriate power conditioner with an area of the room is that it is necessary to use expensive power conditioners.

Choosing the appropriate power conditioner with an area of the room is that it is necessary to use expensive power conditioners. By excess capacity if the electric power consuming then no effect makes the machine is overloaded. For 1000 BTU rear then the download is 2 m ² is maximum. That is, with an area of 9-18 m ², you can air-condition 9000 BTU/h capacity, area in about 15-24 m ² need air 12000 BTU/h or 24 area-35 m ² need select the type 24000 BTU.

To proper temperature

You should set the temperature for air conditioning from 230C-280C. If you want to save even more power should use more open medium room proceeding fan to do the temperature in the room. then just put in 280C mode-290C is enough. If used in this way you will save from 30%-40% of your money.

The voltage stability

The voltage is stable at between 200-220V. If not use the voltage for the automatic.

No off-switch several times

To save electricity, many people choose the solution off the air conditioner when the room is cold and when hot. However, this causes the effect in reverse, making the United States more power due to the air conditioning needed a lot of energy to restart. So to save electricity when using the air conditioner, you should keep the room temperature at a level of stability.

Air-condition in the North

Select the installation location for Sunshine stars hot rig. Best direction is to the North, followed by the South, East and West. If mounting in the South, East or West should have umbrellas, but the roof was not affecting the wind in and out of the hot rig.

Adjust the direction of the wind

Air conditioned in the wings to adjust the direction of the wind to the left or right, up or down. Due to the influence of the speed rotation fan and the location of the pipes cold inside, so the majority of air conditioners have a tendency to blow cold more on one side of the room. You should adjust the direction of the cold blowing into the area of the room (beds, cabinets, desks, etc.). From there, can adjust the temperature in the most optimum level.=