Fitting air conditioning many people make this mistake: The good air conditioner running for a few days is broken, the electricity money goes up

1. Install air conditioner in wall corner

If you plan to install the air conditioner in a corner with the thought that they will help quickly reduce heat and create a cool air for the room, you should give up immediately. This is a completely wrong way. Because when installing the air conditioner in the corner of the wall, it will make the air conditioner operate overload, run more power than normal.

Instead, users should install the device in cool, airy locations and in the center of the room. Yes, the temperature in the new room can be reduced quickly, then slowly cooling in areas with high heat such as wall surface and corner.

2. Install air conditioner with capacity not suitable for the room

Depending on the volume, the room space that you should choose air conditioner with capacity suitable for use. If the room is large and the air-conditioning capacity is low, the temperature is not cold enough, forcing the machine to work continuously, resulting in power loss, heating and damage.

Conversely, if you choose a large room with low air conditioning capacity, the temperature is not cold enough to force the machine to work continuously, resulting in power loss, hot air and fast damage.

3. Install both hot and cold lumps in the same room

This may sound funny, but recently, on facebook, someone shared the image of both hot and cold air conditioners installed in the room with the question 'why open the air conditioner but the room is still not cool' .

Many comments, the main way to install hot lumps, a cold room in the same room is the reason that the air conditioner running all day can not be cool.

According to the advice of an electronics center in Hanoi, air conditioners have two parts called hot and cold. The inside of the cold contains a circulatory system with hot lumps to evaporate a liquid called cold gas.

Understandably, during the operation, the cold will blow out cold air to cool the room, and the hot air blows hot air drawn from the room to the outside.

Thus, the hot air conditioner must be installed outside the room to push the hot air out, and the cold must be installed in the room to blow out cool air to cool the room. In case of deliberately installing both hot and cold room in the same room, it will lead to the phenomenon when the air conditioner is opened, where the cold will be cool, and the hot place will blow hot air.

However, just turning on the air conditioner for half an hour, the whole room will be hot. Because, this time the cold air in the cold will not be enough to neutralize the room anymore because the heat in the hot air blows out with a very high temperature, plus the fan of the hot department has a large flow of air so it will quickly do hot room.

At that time, the air conditioner must be 'gong' to operate at full capacity. Consequently, the electricity bill will skyrocket, and the machine will be broken soon after a few days of use due to overwork.

The installation of both hot and cold lumps in the same room is a rare case. However, if you do not want your air conditioner to fail, you should pay attention to avoid this mistake when installing.

4. Install air conditioner on the wall surface often with sunshine

Many families only pay attention to the location of air conditioner installation without paying attention to the place where the air conditioner is placed. According to experts, installing hot air conditioner in the right direction is the leading cause of shortening the "life expectancy" and making electricity bills increase exponentially.

The reason is because the air conditioner will work overload when you have to preheat the wall before the air cooling process in the room. Therefore, you should install air conditioner in a cool place (North and East of the house) - where there is little direct contact with the sun.

5. Install air conditioner too old

Many homes decided to buy old air conditioners to reduce costs. But they do not know, using the old air conditioner, the cost of paying electricity will be many times higher because the cooling performance of the old machine is not high, the engine is weak. That's not to mention you have to spend money on maintenance and repair because the machine has been used for a long time.

According to experts, air conditioning should be renewed after 10 years of use. The new machine helps you reduce cooling costs by 30 - 50%, compensating for the money you originally spent buying. In addition, the machine needs regular maintenance, cleaning and keeping ventilation openings.

6. Install common air conditioners for both rooms

This case is quite common, because many people think, 2 small rooms, if installing a common air conditioner, located in the middle of 2 rooms, it will save money to buy air conditioners, installation or electricity.

However, using a general air conditioner for 2 rooms, the cooling process will be slower, consuming more electricity.

The reason is that the cold of the air conditioner is usually in the form of a fan to blow out the cool air flow from the outdoor unit. When installing air conditioners dividing in 2 rooms, the wind from the propeller will be blocked much by the dividing wall, leading to a waste of cold wind.